Dimensions
- 9.5" x 5.8" x 1.9" (242mm x 147mm x 48mm)
Draft 802.11n 2.0 Capabilities
- 2x3 MIMO with two spatial streams
- PHY data rates up to 300 Mbps
- Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)
- STBC Range enhancement support
- Reduced active power consumption (< 2.5W per radio)
Data Rates
- 802.11a
- 802.11g
- 802.11n
Antenna Specification
- Frequency Range: 2.4GHz~2.5GHz/5.15GHz~5.875GHz
- Gain: 2.4~2.5 GHz, Gain = 3dBi
- 5.15 ~ 5.875 GHz, Gain = 5dBi
- VSWR: VSWR< 2
Interfaces
- 10/100/1000 Ethernet port
- Serial Console port
- Optional Power Supply, Locking connector
Environmental
- Nonoperating (storage) temperature: –40° to 149°F (–40° to 65°C)
- Operating temperature: –4 to +122°F (–20 to +50°C)
- Operating humidity: Up to 95 percent @ 25°C
Power Options
- Power Supply and Power Injector: 100 to 240 VAC; 50 to 60 Hz
- Power Over Ethernet (POE): 802.3af
Power Draw
- 12.4w
Compliance
- EMC: FCC 15B, 15C, 15E, Canada RSS-210, EN300328, EN301893, EN301489-1, EN55022:2007, EN 55024, EN300386
- Safety: UL2043, CAN/CSA-C22.2 No. 60950-1 (2007), UL 60950-1, EN 60950-1, IEC 60950-1
- Radio Approvals: For a list of supported countries, refer to the AX411 Certification Listing Document
- IEEE Standard: EEE 802.11a/b/g, IEEE 802.11n draft 2.0, IEEE 802.11h, IEEE 802.11d, IEEE 802.11e
- Security:802.11i, Wi-Fi Protected Access 2 (WPA2), WPA, 802.1X, Advanced Encryption Standards (AES), Temporal Key Integrity Protocol (TKIP)
EAP Types
- EAP-TLS
- EAP-TTLS/MSCHAPv2
- PEAPv0/EAP-MSCHAPv2
- PEAPv1/EAP-GTC
- EAP-SIM
Configuring and Deploying the AX411 Wireless Access Point
Download
[ 
730 KB ]
730 KB ]
|
| Part Number | Description |
|---|---|
| AX411-MNT | Wall/ceiling mount bracket for AX411 |
| AX411-MNT2 | Ceiling (t-bar) mounting bracket for AX411 |
| AX411-SPARE-XXX1 | AX411 accessory power supply and power cord |
| AX411-XXX2 | Dual radio, 802.11 a/b/g/n PoE powered access point (does not include power supply) |
| Branch SRX Series (SRX100, SRX110, SRX200, SRX220, and SRX650) AX411 Software Licenses | |
| AX411-2 | License support for management of up to 2 AX411 access points in a L2 Cluster3 |
1 See price list for country-specific power cord model numbers.
2 See price list for country-specific AX411 SKUs.
3 All branch SRX Series products ship with a license to manage two AX411 APs by default. SRX100 and SRX110 can manage up to two AX411 APs. All other branch SRX Series products can manage up to four AX411 APs.
Seitenübersicht / RSS Feeds / Karriere / Erreichbarkeit / Feedback / Datenschutz / Rechtliche Hinweise
Copyright© 1999-2012 Juniper Networks, Inc. All rights reserved.
